<video id="yyyr3"></video>
<mark id="yyyr3"></mark>
<i id="yyyr3"></i>

    <b id="yyyr3"></b>

    Auto parts replacement points

    Source:Jinhua Haoxiang Auto Parts Co., Ltd.Publication time:2019-06-04

    Auto parts replacement points

    First, try to use the sealant, you can use the paint to achieve the ideal sealing effect;

    Second, the rubber seal should be carefully checked for appearance quality before assembly; use special tools to press fit to avoid knocking deformation;

    3. Fill the lubricating grease according to the regulations, and regularly clean the venting holes and check valves;

    4. Assembling in extremely clean conditions, the working surface of the parts is free from bumps, scratches, burrs and other attachments;

    5. Strict operation procedures, the seals should be properly installed to prevent deformation in place;

    6. Master the performance specifications and use requirements of the seals and replace the failed parts in time;

    7. For side-wall thin-walled parts, use sheet metal cold for correction; shaft hole parts that are easy to wear can be metallized, welded, glued, machined, etc. to achieve the original size;

    Eighth, the nut slide wire is broken and loose, and new parts should be replaced and screwed to the specified torque.